Preliminary design of a laser accelerator beam line

SHANG Yong; ZHU Kun; CAO Chao; ZHU Jun-Gao; LU Yuan-Rong; GUO Zhi-Yu; CHEN Jia-Er; YAN Xue-Qing

doi:10.1088/1674-1137/38/11/117011

Chinese Physics C> 2014, Vol. 38> Issue(11) : 117011 DOI: 10.1088/1674-1137/38/11/117011

Preliminary design of a laser accelerator beam line

Abstract
HTML
Reference
Related

PDF

Abstract：
A compact laser plasma accelerator (CLAPA) is being built at Peking University, which is based on an RPA-PSA mechanism or other acceleration mechanisms. The beam produced by this laser accelerator has the characteristics of short duration, high pulse current, large divergence angle, and wide energy spectrum. The beam cannot be produced by a normal ion source and accelerator. The space charge field in the initial is very strong. According to the beam parameters from preparatory experiments and theoretical simulations, a compact beam line is preliminarily designed. The beam line mainly consists of common transport elements to deliver proton beam with the energy of 1-50 MeV, energy spread of 0-± 1% and current of 0-10⁸ proton per pulse to satisfy the requirement of different experiments. The simulation result of a 15 MeV proton beam with an energy spread of ± 1%, current of 400 mA, and final spot radius of 9 mm is presented in this paper.

References

[1]

Snavely R A, Key M H, Hatchett S P et al. Phys. Rev. Lett., 2000, 85: 2945[2] Mulser P, Bauer D, Ruhl H. Phys. Rev. Lett., 2008, 101: 225002[3] Daido H, Nishiuchi M, Pirozhkov A S. Rep. Prog. Phys., 2012, 75: 056401[4] YAN X Q, WU H C, SHENG Z M et al. Phys. Rev. Lett., 2009, 103: 135001[5] WANG H Y, YAN X Q, CHEN J E et al. Phys. Plasmas, 2013, 20: 013101[6] WANG H Y, LIN C, SHENG Z M et al. Phys. Rev. Lett., 2011, 107: 265002[7] Mackinnon A J, Sentoku Y, Patel P K et al. Phys. Rev. Lett., 2002, 88: 215006[8] Fuchs J, Cecchetti C A, Borghesi M et al. Phys. Rev. Lett., 2007, 99: 015002[9] Roth M, Cowan T E, Key M H et al. Phys. Rev. Lett., 2001, 86: 436[10] Macchi A, Borghesi M, Passoni M. Rev. Mod. Phys., 2013, 85: 751[11] Ter-avetisyan S, Schnurer M, Polster R et al. Laser and Particle Beams, 2008, 26: 637[12] Schollmeier M, Becker S, Geiel M. Phys. Rev. Lett., 2008, 101: 055004[13] Nishiuchi M, Daito I, Ikegami M et al. Appl. Phys. Lett., 2009, 94: 061107[14] Roth M, Alber I, Bagnoud V et al. Plasma Phys. Control. Fusion, 2009, 51: 124039[15] Harres K, Alber I, Tauschwitz A et al. Phys. Plasmas, 2010, 17: 023107[16] Toncian T, Amin M, Borghesi M et al. AIP Advances, 2011, 1: 022142[17] Nishiuchi M, Sakaki H, Hori T et al. Phys. Rev. ST Accel. Beams, 2010, 13: 071304[18] Yogo A, Maeda T, Hori T et al. Appl. Phys. Lett., 2011, 98: 053701[19] Hofmann K M, Schell S et al. J. Biophotonics, 2012, 5(11-12): 903[20] Hofmann I, Meyer-ter-Vehn J, YAN X Q et al. Phys. Rev. ST Accel. Beams, 2011, 14: 031304[21] JUNG D, YIN L, Albright B J et al. Phys. Rev. Lett., 2011, 107: 115002[22] Ostroumov P N, Aseev V, Mustapha B. ANL, 2006[23] YAN X Q, LIN C, LU H Y et al. Front. Phys., 2013, 8(5): 577

[1]	He-Ting Li , Qi-Ka Jia , Shan-Cai Zhang , Lin Wang , Yong-Liang Yang . Design of FELiChEM, the first infrared free-electron laser user facility in China. Chinese Physics C, 2017, 41(1): 018102. doi: 10.1088/1674-1137/41/1/018102
[2]	JIAO Yi , CUI Xiao-Hao . Generating a uniform transverse distributed electronbeam along a beam line. Chinese Physics C, 2015, 39(11): 117001. doi: 10.1088/1674-1137/39/11/117001
[3]	SHEN Xiao-Kang , CAO Shu-Chun , ZHANG Zi-Min , JING Yi , FENG Yu-Cheng , WANG Hui , ZHAO Hong-Wei , ZHAO Quan-Tang , LIU Ming , LI Zhong-Ping . Experimental investigation of a pulse line ion accelerator in Lanzhou. Chinese Physics C, 2014, 38(11): 117008. doi: 10.1088/1674-1137/38/11/117008
[4]	ZHU Jun , ZHANG Huang , PENG Shi-Xiang , REN Hai-Tao , XIA Lian-Sheng , WANG Wen-Dou , YANG Zhi-Yong , SHEN Yi , SHI Jin-Shui , ZHANG Lin-Wen , DENG Jian-Jun . Beam transport design for a 1 MeV prototype dielectric wall accelerator. Chinese Physics C, 2014, 38(4): 047001. doi: 10.1088/1674-1137/38/4/047001
[5]	DOU Wei-Ping , HE Yuan , LU Yuan-Rong . Beam dynamics design for uranium drift tube linear accelerator. Chinese Physics C, 2014, 38(7): 077001. doi: 10.1088/1674-1137/38/7/077001
[6]	WANG Bo , ZENG Rong , NIU Ben , SHEN Xiao-Li , SHEN Xiao-Kang , CAO Shu-Chun , ZHANG Zi-Min . E-field measurement of a pulse line ion accelerator. Chinese Physics C, 2013, 37(7): 077003. doi: 10.1088/1674-1137/37/7/077003
[7]	WU Dai , YANG Ren-Jun , BAI Wei , LI Peng , LI Ming , YANG Xing-Fan . Design study of an improved laser wire system for electron beam measurement. Chinese Physics C, 2013, 37(10): 108101. doi: 10.1088/1674-1137/37/10/108101
[8]	LUO Wen , XU Wang , ZHUO Hong-Bin , MA Yan-Yun . Preliminary experimental study and simulation of an energy-tunable quasi-monochromatic laser-Compton X/γ-ray source. Chinese Physics C, 2012, 36(8): 769-776. doi: 10.1088/1674-1137/36/8/016
[9]	SHEN Xiao-Kang , ZHANG Zi-Min , CAO Shu-Chun , ZHAO Hong-Wei , WANG Bo , SHEN Xiao-Li , ZHAO Quan-Tang , LIU Ming , JING Yi . Electric field simulation and measurement of a pulse line ion accelerator. Chinese Physics C, 2012, 36(7): 661-665. doi: 10.1088/1674-1137/36/7/016
[10]	SHEN Xiao-Kang , CAO Shu-Chun , ZHANG Zi-Min , ZHAO Hong-Wei , ZHAO Quan-Tang , LIU Ming , JING Yi , LI Zhong-Ping , WAN Ming , WANG Bin , YANG Chun-Ming , XIAO Rong-Qing , ZHANG Ying-Fa , LI Ji-An . The test pulse line ion accelerator in Lanzhou. Chinese Physics C, 2012, 36(3): 241-246. doi: 10.1088/1674-1137/36/3/009
[11]	M. Y&#0 , maz . DTL cavity design and beam dynamics for a TAC linear proton accelerator. Chinese Physics C, 2012, 36(2): 167-172. doi: 10.1088/1674-1137/36/2/012
[12]	XU Ji-Lei , GUAN Meng-Yun , YANG Chang-Gen , WANG Yi-Fang , ZHANG Jia-Wen , LU Chang-Guo , Kirk McDonald , Robert Hackenburg , Kwong Lau , Logan Lebanowski , Cullen Newsom , Lin Shih-Kai , Jonathan Link , MA Lie-Hua , Viktor Pec , Vit Vorobel , CHEN Jin , LIU Jin-Chang , ZHOU Yong-Zhao , LIANG Hao . Design and preliminary test results of Daya Bay RPC modules. Chinese Physics C, 2011, 35(9): 844-850. doi: 10.1088/1674-1137/35/9/011
[13]	ZHU Ying-Shun , YANG Mei , ZHANG Zhuo , CHEN Wan , YIN Bao-Gui , SHI Cai-Tu , KANG Wen . Design and end chamfer simulation of PEFP beam line curved dipole magnets. Chinese Physics C, 2011, 35(7): 684-688. doi: 10.1088/1674-1137/35/7/015
[14]	XIAO Chen , HE Yuan , LIU Yong , YUAN You-Jin , WANG Zhi-Jun , HE Shou-Bo , XU Meng-Xin , LI Chao , YUE Wei-Ming , CHANG Wei , ZHAO Hong-Wei , XIA Jia-Wen . Preliminary design and simulation of a 162.5 MHz high- intensity proton RFQ for an accelerator driven system. Chinese Physics C, 2011, 35(11): 1053-1058. doi: 10.1088/1674-1137/35/11/014
[15]	ZHANG Bin , CHEN Yi-Xue , WANG Wei-Jin , YANG Shou-Hai , WU Jun , YIN Wen , LIANG Tian-Jiao , JIA Xue-Jun . Preliminary shielding analysis in support of the CSNS target station shutter neutron beam stop design. Chinese Physics C, 2011, 35(8): 791-795. doi: 10.1088/1674-1137/35/8/017
[16]	LIU Bi-Cheng , YAN Xue-Qing , LIN Chen , LU Yuan-Rong , GUO Zhi-Yu , FANG Jia-Xun , SHENG Zheng-Ming , LI Yu-Tong , CHEN Jia-Er . Generating monoenergetic proton beam by using circularly polarized laser. Chinese Physics C, 2009, 33(S2): 168-170. doi: 10.1088/1674-1137/33/S2/044
[17]	BEI Hua , DENG Hai-Xiao , DAI Zhi-Min . Design of EPU oscillator cavity in femtosecond accelerator. Chinese Physics C, 2009, 33(S2): 93-95. doi: 10.1088/1674-1137/33/S2/024
[18]	LI Jin-Hai , OUYANG Hua-Fu , FU Shi-Nian , ZHANG Hua-Shun , HE Wei . Design of the low energy beam transport line for the China spallation neutron source. Chinese Physics C, 2008, 32(3): 227-231. doi: 10.1088/1674-1137/32/3/014
[19]	Xu Sida , Shang Rencheng , Zhang Shuming , Ye Zipiao , Zhang Wei , Zhao Zizheng , Luo Yixiao . Experimental Results of the Off-Line Test Setup of Laser Ion Source. Chinese Physics C, 1995, 19(S4): 363-367.
[20]	Tang Esheng , Cui Mingqi , Liu Libing , Xu Wenxuan , Chao Zhiyu , Wu Yingrong , Wang Chunxi , Xian Dingchang . Preliminary Observation of the Synchrotron Radiation Spot From Wiggler Beam Line 4W1A at IHEP. Chinese Physics C, 1990, 14(S3): 231-236.

Access

Get Citation

SHANG Yong, ZHU Kun, CAO Chao, ZHU Jun-Gao, LU Yuan-Rong, GUO Zhi-Yu, CHEN Jia-Er and YAN Xue-Qing. Preliminary design of a laser accelerator beam line[J]. Chinese Physics C, 2014, 38(11): 117011. doi: 10.1088/1674-1137/38/11/117011

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2013-12-02
Revised: 1900-01-01

Article Metric

Article Views(1792)
PDF Downloads(182)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, [email protected]

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Preliminary design of a laser accelerator beam line

Corresponding author: ZHU Kun,

Corresponding author: YAN Xue-Qing,

Received Date: 2013-12-02

Accepted Date: 1900-01-01

Available Online: 2014-11-05

Abstract: A compact laser plasma accelerator (CLAPA) is being built at Peking University, which is based on an RPA-PSA mechanism or other acceleration mechanisms. The beam produced by this laser accelerator has the characteristics of short duration, high pulse current, large divergence angle, and wide energy spectrum. The beam cannot be produced by a normal ion source and accelerator. The space charge field in the initial is very strong. According to the beam parameters from preparatory experiments and theoretical simulations, a compact beam line is preliminarily designed. The beam line mainly consists of common transport elements to deliver proton beam with the energy of 1-50 MeV, energy spread of 0-± 1% and current of 0-10⁸ proton per pulse to satisfy the requirement of different experiments. The simulation result of a 15 MeV proton beam with an energy spread of ± 1%, current of 400 mA, and final spot radius of 9 mm is presented in this paper.

HTML

Reference (1)

Preliminary design of a laser accelerator beam line

Abstract：

References

Access

Article Metrics

Metrics

通讯作者: 陈斌, [email protected]

Email This Article